The operation of matters of PCB engraving machine

About PCB engraving machine the other information please visit http://www.shyidiao.com/ for more details.

Note PCB engraving machine
1, the environment must be consistent with the computer work request.
2, the working voltage must be between 210V-230V, if the voltage is not requested, it must adopt regulated power supply. Because there are a lot of problems of quality power supply on the market, so the voltage regulator must obtain the consent of the force company or its authorized agents recognized (power is more than 2000W, the common weight should be in 15 kilograms of above).
3, the power supply must have good grounding (must have the wire), otherwise, will be well received housing grounded conductor (such as: water pipes, heating pipes, metal doors, I device wire.)
In 4, operation must pay attention to safety; PCB engraving machine which belongs to the mechanical processing equipment, should be carried out according to the operation of the machine tool operation request, can not wear gloves, can not contact the carving machine is a kind of professional equipment, if fault timely and the distributor contact, as long as can please professional repair under the permission of the consent of the dealer.
5, pay attention to maintenance: in the use of the process must enhance carve machine maintenance, so as to prolong the service life of carving machine. After use each time finished engraving machine, engraving machine, must pay attention to clean, add oil on the guide rail, so as to avoid PCB engraving machine by environmental corrosion, due to the force of carving machine adopts self smooth wear-resistant screw, so just in the use of a quarter and smooth agent.
By 6, the spindle motor: engraving machine carving motor warranty for six months, we adopt frequency conversion motor carved for water-cooled motor, high value, so we must pay attention to the correct use of motor. The speed of the motor and its life is inversely proportional to the. Ensure that the water cycle to the operation of the motor, and add appropriate amount of preservative, use should pay attention to motor parameters provide reference manual on the implementation of choice.
7, the spindle motor maintenance: if appear PCB engraving machine motor stops or the status of the motor speed unevenness situation, please immediately cut off the power supply and repair and dealers. If the motor stopped under the condition of the motor is not power, otherwise the motor by the circle will immediately burned, ask users to use must pay attention to.
The maintenance of 8, a clamping head: between the motor card tool and by metal friction fixed, so the device tool refueling, avoid PCB carving long time not disassemble or cooling liquid corrosion and the formation of removing hard.
9, cutting can not add coolant: stop cutting knife pillar (referring to wood, organic glass, snow floating plate), plus the coolant will seriously affect the cutting chip discharge and cause of tool breaking spit.
10, power maintenance: repeated boot distance time shall not be less than 30 seconds.
11, fan maintenance: cleaning fan dust regularly.
The maintenance of 12, drive power can not be forcibly moved: X, Y, Z three axis position. 13, driving card maintenance: keep clean inside the computer case, the card must be fixed tightly.
PCB engraving machine training request
1, the basic theory of training required: start from the theory of training, the operator must pass in the appraisal theory under the condition of practice operation training. If PCB engraving machine theory training did not pass, then the firm can not implement the operation training.
The use of question 2, tool: in theory after training, must carry out the training tool. The operator can against common tool, speed, carving motor running speed, attention matters, must know that the application of operating personnel must be familiar with the tool.
Scope of application: 3, data application range of operating personnel must be familiar with various materials, different materials familiar, different thickness, different scrap size. Familiar with the different data of different cut and polish method.
4, PCB engraving machine of various software operation: after the above training front can implement software training. Software training mainly concentrated in the user application category; on the user need not aspects according to the training manual for self-study. Software: software request for various typesetting, various operating and the way of generation, can quickly find out ways to error etc..
5, the machine operation training: after various training above, trained staff's explanation and operators understand the appraisal: the operating staff to operate safe and operation note item training, safety training personnel in the operation by considerations on the signature recognition, the operating personnel can stop the machine operation training.
6, engraving machine operating various matters needing attention and the carving machine maintenance training.