As for stone carving machines, first, we should pay attention to the performance of carving machines. The power of carving machines can be divided into different sizes. Some carving machines have smaller power, which is suitable for processing and carving materials with smaller hardness. Some are high-power machines, which can be used for cutting and carving. The accuracy of dividing machines is generally poor, but the strength is large. Carving machines can carve materials with larger hardness, Its accuracy is also relatively high.

Second, the spindle motor is also very important. The engraving head motor works continuously for a long time. The poor quality of the motor will not only affect the engraving effect, but also seriously affect the service life of the engraving machine. Please pay attention to this.

Third, the speed of the spindle motor can be adjusted. Generally, the speed can be adjusted from thousands to tens of thousands of revolutions. If the speed cannot be adjusted or the speed can be adjusted in a small range, it means that the range of use of the engraving machine is too limited. In addition, for materials with high hardness, it is better to slow the speed. Otherwise, in the case of high hardness and high speed, the damage to the engraving tool is very significant, and even there are short knives, This is detrimental to the overall performance of the machine. Therefore, to deal with different materials, it is necessary to adjust to the corresponding speed.

Fourth, the accuracy and stability of the engraving machine are the concerns of many customers. The stability is the most important for the long-term work of the machine. For example, the stability of the forged bed is relatively high, and the long-term use has little impact on the machine. The machine cast iron bed and the whole machine forging of our company are all very stable.

Fifthly, controllers are generally divided into two types: one type of controller is only used for driving, and all its calculations are completed by the computer. The computer is in a waiting state when the engraving machine is working, and cannot perform typesetting. The other controller is controlled by a single board computer or a single chip computer. This controller is actually a computer, so the computer can perform other typesetting work as soon as the engraving machine starts to work. Especially in the case of long-term engraving, this advantage is particularly significant.